The Usage Of Different Type Of Nails
Normally, nails are used to connect pieces of wood or to add other materials to wood. They are literally pounded in place by friction and left there. Some have shanks that are rough to keep them better.
As they are used for so many different purposes, there is a large number of nails. There are many different types made for specialized uses, but for most ordinary wood construction only a few are used. These include common nail, box nail, finishing nail etc. All are available in different diameters and lengths.
Common nail. A lot of wood is used with the common nail which does not require finishing work. Over 2x4s and other surfaces such as particle board and standard wood panels are places to use the nails. It has a flat head and comes in various lengths. Typically the head of the nail is left to reveal. Use all your energies to remold around your house or garage.
Casing nail. When working with wood, the casing nails are for all your finer work needs.For these types of nails, the cabinets and molding trim work is fine. So if you want any new shelves or new kitchen cabinets, make sure you have them at your fingertips. You don‘t want the unsightly nail heads to ruin your detailed work.
Finishing nail. The finishing nails are another form of nail, but they can be used interchangeably for fine home work with casing nails. The heads of the rounded nails may or may not be counter-sunk.
Box nail. Box nails are like a can nail, but they have a much larger head on them. The Nail’s shank is much wider and is primarily used for framing and decking. This is the nail for you if you need intense holding power.
Galvanized nail. Use these nails when constructing a dog house, framing or building a Children‘s wooden sandbox. These are coated with a highly rust-resistant solution. The shank makes bending them really hard.
Many nails are made of heavy steel wire by nail machine. Thousands of nails per minute can be made by these devices. First, the computer cuts the length of the cable. Instead one end of the wire is flattened to create the ear. Then, at the other end, it cuts the stage. Today, most nails are made from steel wire that is fed into a nail machine from large spools that cuts it into individual lengths of nails. Grippers hold firmly the piece of wire as a powerful hammer strikes one end of the projection,
flattening it to form the head of the nail.It is then pulled forward, and two knives converge on it, cutting the point to the correct
length.Many types of nails, known as cut nails, from metal sheets are stamped or cut. Rather than round, these are rectangular.
The rest of the nails are made of steel. Masonry nails are made of specially hardened steel,used on concrete or masonry. Many nails are galvanized, like roofing nails. This means to prevent rusting, they are coated with zinc. Nails must be
particularly rustproof when used on vessels that is why the nail making machine for different nail is different.
